Posts Tagged ‘floor’

Ladder on the floor

February 20th, 2010 by admin

Unfavorable humidity can also affect the appearance of this unwanted optics on the floor when the boards are stacked and thereafter will be still wet work. The effect of “ladder”, it would be brick. Like inadequate care too wooden floor surface. Using the popular will always mops the effect of “ladder”. Such a defect may even affect the concern for an investor or a painter, and security while the other works of wood sheeting. Laying the film always generates defects in the creation of wooden floors.

To secure a much better is corrugated cardboard. Quite often observed “ladder” in the uninhabited homes when the owners eats for a long time, and closes tightly venue. So long ago in terms of its warranty have made the need for systematic ventilation of premises in the first two years after laying a wooden floor. By showing pictures and describing the “ladder” I wanted to draw attention to performers on something that may be encountered in realization of layered wood flooring, however, very rarely assume responsibility. Actually, if made prior to installation moisture measurements on building and they were correct, the possible emergence of later “ladder” is not their problem.

Amazing Chicago Cleaning Services and Chicago Maids Services!!

Ladder on the dance floor ready. Where does it come from?

February 20th, 2010 by admin

Parquet layer is ready now want to use the floor. His popularity is so high that it can be said to dominate the market to cover the wood in both buildings and in homes.

Like any type of flooring and it has has its. Three layer construction consists of a layer of precious wood, usually about 2-3,5 mm thick, and two layers of pine or spruce. All the layers are arranged transversely to each other and mutually glued together. Glued each layer are not of equal thickness. Thickest layer of wood is always in the middle of the board. The thinnest, the layer of wood
on the bottom. Wood coat layer is thin, but enough to allow according to the standards at least twice the renovation. It was a thick middle layer and a thin ‘upper layer in favor of adverse
conditions on the formation of peculiar injury. Peculiar because it occurs only at stage two and always painted floors. This defect is renowned as a “ladder”, which appears in the optics floor ladder on the floor usually some time after installation.

The photos we see the lateral stripes, appearing either locally or over the entire surface. This middle layer when, pierces the top layer of boards. Proved that the ideal plane, in the light set at a low angle inequality, even the minimum of the size of 0.01 mm may be visible to the human eye. Most visible are not discernible striations of the fingers, it can be determined using rails and sensor clock.

Amazing Chicago Cleaning Services and Chicago Maids Services!!